NEW! Ultraxtend WiFi Booster Installation Guide 2025 |How To Set Up Ultraxtend WiFi Extender Easily

Step-by-Step Installation Guide for Ultra Extend Wi-Fi Booster

Unbox and Plugin

Begin by unboxing your Ultra Extend Wi-Fi booster. Once unboxed, plug the booster into a wall outlet that is near your router. Wait for approximately 30 to 60 seconds until you see the LED light begin to blink.

Choose Your Setup Mode

You have two setup options:

Option A: WPS Method (Quick Setup)

1. Press the WPS Button: Start by pressing the WPS button on your router.
2. Activate the Booster: Within 2 minutes, press the WPS button on the Ultra Extend Wi-Fi booster.
3. Check Connection: Wait for the LED indicator to turn solid green or blue. This signifies that the booster is connected.

Your Ultra Extend will now repeat your main Wi-Fi signal, typically broadcasting a name similar to your existing Wi-Fi network followed by "extension" or "extender."

Option B: Manual Setup

If you prefer the manual setup, follow these steps:

1. Initial Placement: Plug in the booster near your router or gateway.
2. Connect to Booster: Use a phone or laptop to connect to the Ultra Extend Wi-Fi signal, which may be labeled something like "Extra Ultra Extend".
3. Open Your Browser: Launch a web browser and navigate to the URL displayed on your screen.
4. Login: Enter your username and password to access the setup interface.
5. Select Your Network: Choose your home Wi-Fi network from the list of available networks.
6. Enter Password: Input your home Wi-Fi password.
7. Set New SSID: Optionally, set a new name (SSID) for your extended network.

Complete the Setup

After you complete the setup process, the extender will reboot and connect to your home Wi-Fi.

Reposition the Booster

Once the setup is finalized, unplug the Ultra Extend and move it to a location that is roughly halfway between your router and the area with weak signal strength. Ensure it is still receiving at least 50% of the signal from your router. Plug it into the wall outlet.

Final Steps

Wait for the LED light to stabilize. After the light is stable, connect your devices—phones, tablets, or other smart devices—to the new extended network. The network name might be similar to your original Wi-Fi network or whatever name you assigned during setup.

Thank you for following this guide! Enjoy your enhanced Wi-Fi coverage!