NEW! Turtle Beach Stealth 600 USB Transmitter Not Working 2025 | Fix Wireless Connection Issues FAST

How to Fix Total Beach Still 600 USB Transmitter Issues

If you’re having trouble with your Total Beach Still 600 USB transmitter not working with your headset, follow these steps to troubleshoot and resolve the issue.

Step 1: Check the USB Port and Power

Start by inspecting the USB port and ensuring it receives power.

• Try plugging the transmitter into a different USB port, ideally one located on the back of your PC or console.
• Avoid using USB hubs or extenders, as they can create connectivity problems.
• Confirm that the USB port works by checking it with another device.

Step 2: Power Cycle the Headset and Transmitter

Next, you’ll want to power cycle both the headset and transmitter.

1. Turn off the headset completely.
2. Wait for about 30 seconds.
3. Plug the transmitter back into the USB port.
4. Turn the headset back on.

Step 3: Re-pair the Headset and Transmitter

With the transmitter plugged in, take the following steps to re-establish the connection:

1. Ensure the LED on the transmitter is blinking.
2. Press and hold the power button on the headset until the LED starts blinking rapidly, indicating it’s in pairing mode.
3. If the headset and transmitter are paired successfully, you will see both LEDs turn solid.
4. If they do not pair, you may need to reset both devices.

Step 4: Reset the Headset

If you’re using the Still 600 Generation 2 or similar models, you can reset the headset by following these steps:

1. Press and hold either the mode button, connect button, or power + mode buttons simultaneously for 20 seconds.
2. The headset should power cycle and reset.
3. Try the pairing process again as described in Step 3.

Step 5: Update Firmware via Beach Audio Hub

The final step in troubleshooting is to update the firmware, as outdated software is a common cause of transmitter issues.

1. Download the Total Beach Audio Hub for either PC or Mac.
2. Plug in both the headset and transmitter via USB.
3. Run the software and check for firmware updates.

Conclusion

By following these troubleshooting steps, you should be able to resolve your Total Beach Still 600 USB transmitter issues. Thank you for reading!