NEW! How To Reset Roborock S8/S8PRO S8 Fix Not Connecting (2025) | Easy Troubleshooting Guide!

How to Reset Your Robrock X8 Pro

If your Robrock X8 Pro isn’t connecting to your network or the internet, a reset may be necessary. Follow this step-by-step guide to easily reset your vacuum and restore its connectivity.

Step 1: Open the Top Cover

Begin by gently lifting the top cover of your Robrock X8 Pro. This will allow you access to the Wi-Fi control components.

Step 2: Locate the Wi-Fi Indicator Light

Inside, you will find a small light that indicates the Wi-Fi status. This light will be essential for confirming the success of the reset.

Step 3: Press and Hold the Buttons

Press and hold both the reset button and the power clean button simultaneously. It’s crucial to hold these buttons down for the next steps.

Step 4: Listen for the Voice Prompt

Continue holding the buttons until you hear a voice alert indicating that the Wi-Fi is resetting. This audio cue confirms that the reset process is underway.

Step 5: Observe the Wi-Fi Indicator Light

After the voice prompt, pay attention to the Wi-Fi indicator light. It should begin to flash slowly, signifying that the reset was successful and the robot is ready to connect to a new Wi-Fi network.

Reconnecting to Wi-Fi

Once you’ve reset your Robrock X8 Pro, you’ll need to reconnect it to your Wi-Fi network.

Step 1: Download the App

Ensure that you have either the Robrock or Mi Home app installed on your smartphone. This app will guide you through the reconnection process.

Step 2: Add a New Device

Open the app and tap the plus icon to add a new device. The app will direct you through the necessary steps to complete the setup.

Step 3: Follow On-Screen Instructions

Carefully follow the on-screen instructions provided by the app. This will help you successfully reconnect your Robrock X8 Pro to your Wi-Fi network.

Thank you for following this guide! We hope it helps you get your Robrock X8 Pro back online.