NEW! How To Reset or Fix Pairing on Razer Barracuda (2025)

How to Reset Your Razer Bakuda X

If you’re having trouble pairing your Razer Bakuda X or if it’s simply not working, follow these steps to reset your headset. This guide will walk you through simple troubleshooting steps.

Step 1: Power Cycle Your Devices

To start, power cycle both the headset and the USB-C dongle:

1. Turn Off the Headset: Locate the power button and turn off your Razer Bakuda X headset.
2. Unplug the USB-C Dongle: Disconnect the dongle from your PC or console.
3. Wait 30 Seconds: Allow a brief pause for a complete reset.
4. Replug the Dongle: After waiting, plug the USB-C dongle back into your device.
5. Power On the Headset: Turn the headset back on.

Step 2: Pair the Headset with the Dongle

Next, you will reconnect the headset to the dongle:

1. Connect the USB-C Dongle: If using an adapter (USB-C to USB-A), ensure it supports data transfer, not just charging.
2. Press the Pairing Button on the Dongle: This is usually a small pinhole button that requires a paper clip to access. Hold it until the LED starts blinking.
3. Power On the Headset: Press and hold the power button for about 5 seconds until you hear a tone or see the LED light blinking.
4. Sync Both Devices: Wait for the headset and dongle to establish a connection. When successfully paired, the LED will turn solid.

Step 3: Verify Connection Mode

Ensure you’re using the correct connection mode:

1. Check Connection Mode: If you’re using the Bakuda X model, ensure you’re not accidentally on Bluetooth mode when trying to connect via the 2.4 GHz dongle.
2. Mode Switch: Tap or press the mode switch button to toggle between Bluetooth and wireless.
3. Set as Default Audio Device:
   • On your PC, go to "Sound" settings.
   • Under "Output," select "Razer Bakuda Wireless."
   • Under "Input," select the microphone from the headset if required.

Step 4: Update the Firmware

Keeping your firmware updated can resolve compatibility issues:

1. Download Razer Synapse or Razer Audio App: Use these applications on either Windows or your mobile device to check for updates.
2. Follow Instructions: Update the firmware as prompted by the software.

Final Step: Factory Reset

If the issue persists, you can perform a factory reset (soft reset):

1. Power Off the Headset: Start by turning off your headset.
2. Hold the Power Button: Press and hold the power button for 20 to 50 seconds until the LED blinks rapidly and then shuts off.
3. Power On Again: Release the button, then turn the headset back on.

By following these steps, you should be able to reset your Razer Bakuda X and resolve pairing issues.

Thank you for reading! If you found this guide helpful, consider subscribing for more tips and troubleshooting advice.