New! How To Reset Goodman Furnace | Easy Reset Button Location Full Guide!

How to Reset Good Man for NAS: A Step-by-Step Guide

In this article, we will walk you through the steps to reset your Good Man for NAS system. Whether you’re facing an issue with heating or just need to restart the unit, following these steps will help you get your system back on track.

Step 1: Turn Off the Power

Before beginning any reset procedure, it’s essential to ensure your system is powered off. Locate the power switch on your Good Man for NAS unit. It often resembles a light switch and should be situated near the unit itself. Flip this switch to the "off" position to cut the power.

Step 2: Locate the Reset Button

After the power is turned off, it’s time to locate the reset button. Open the front access panel of your unit, paying close attention to the blower motor at the bottom. Look for a small red or yellow button labeled "reset." This is the button you’ll need to press during the reset process.

Step 3: Press the Reset Button

Firmly press and hold the reset button for several seconds. You should feel or hear a slight click, indicating that the reset button has been engaged. If the button pops back up immediately, it could mean that your NAS is still overheating or there may be another underlying fault that requires your attention.

Step 4: Restore Power

Once you’ve successfully pressed the reset button, it’s time to restore power to your system. Securely close the access panel and flip the power switch back to the "on" position. Wait a few minutes to allow the system to reboot completely.

Step 5: Check the Thermostat and System

After the system has rebooted, check your thermostat settings. Ensure that it is set to "heat" and that the temperature is configured above the current room temperature. At this point, your fan should start running, and the heating cycle should commence.

Conclusion

You’ve now successfully completed the reset process for your Good Man for NAS system. If you follow these steps and encounter any issues, it may be wise to consult a professional technician for further assistance. Thank you for reading, and we hope this guide has been helpful in troubleshooting your heating system!