NEW! How To Reset Carrier Furnace (2025) | Easy Step-by-Step Guide for Furnace Reset!

How to Reset Your Carrier Furnace: A Step-by-Step Guide

If your Carrier furnace has stopped working or is displaying an error, resetting it can often resolve the issue. Follow these simple steps to reset your furnace and hopefully restore it to proper functionality.

Step 1: Turn Off the Power

The first step in resetting your Carrier furnace is to turn off the power. You can do this by flipping the furnace power switch, usually found on or near the unit. It resembles a standard light switch. Alternatively, you can cut the power by turning off the breaker related to the furnace at your home’s electrical panel.

Step 2: Locate the Reset Button

Next, you’ll need to find the reset button. This is typically a small red or yellow button located on the blower motor housing or inside the control panel. You may need to remove a panel or door to access it.

Step 3: Press the Reset Button

Once you’ve located the reset button, press and hold it for about 3 to 5 seconds, then release it. If your furnace has overheated, the button may have popped out slightly. If that’s the case, simply press it back in.

Step 4: Restore Power

After pressing the reset button, it’s time to restore power to the furnace. Flip the power switch back on or turn on the circuit breaker. Wait a few minutes for the furnace to reboot.

Monitoring the Furnace

Once the furnace has had time to reboot, observe its operation. It should start up normally. If it does not, pay attention to any blinking LED error codes or listen for clicking sounds, as these can provide clues about further issues that may need addressing.

In conclusion, resetting your Carrier furnace is a straightforward process that can often resolve small issues. If problems persist after a reset, it may be time to consult a professional for further diagnostics. Thank you for reading!