NEW! How To Fix Turtle Beach Stealth 600 Mic Not Working (2025)Troubleshooting Guide & Quick Fixes!

How to Fix Your Total Beats Stealth 600 Mic Issues

If you’re experiencing problems with your Total Beats Stealth 600 microphone—whether it’s not working or displaying any error messages—follow these step-by-step instructions to resolve the issue.

Step 1: Check if the Mic is Muted

Start by ensuring that your microphone isn’t muted. If your mic is muted, simply unmute it.

Step 2: Restart Your Console or PC

Sometimes, a quick reboot can resolve temporary glitches. Restart the console or PC you’re using with your Stealth 600 headset.

Step 3: Power Cycle the Headset

To power cycle the headset, hold down the power button for about 20 seconds until the headset shuts off. Once it’s off, turn it back on and see if the issue persists.

Step 4: Update Firmware via Turtle Beach Audio Hub

1. Download Turtle Beach Audio Hub: Get the latest version of the software.
2. Connect the Headset and Transmitter: Use a USB connection to link both the headset and its transmitter to your PC.
3. Follow the Prompts: Update the firmware through the prompts in the Turtle Beach Audio Hub.

Step 5: Re-Pair the Headset with Xbox

1. Prepare for Pairing: Press the pairing button on the headset until the LED blinks quickly.
2. Pair with Xbox Console: Press the pairing button on your Xbox console.
3. Wait for Connection: Allow a moment for them to connect.

Step 6: Adjust Xbox Settings

1. Go to Settings: Navigate to “Settings” and then “Devices & Accessories.”
2. Adjust Controller Volume: Ensure that the headset mic is turned on.
3. Check Mic Monitoring: Make sure mic monitoring isn’t turned all the way down.

Step 7: Review Audio Settings

1. Access Settings: Go to “Settings” and then “Sound.”
2. Select Microphone and Input Device: Confirm that the Stealth 600 is selected.
3. Check Microphone Level: Ensure that the microphone level is not set too low.

Step 8: Update Firmware Again

Repeat the firmware update process using the Turtle Beach Audio Hub. Additionally, you may need to replug the wireless transmitter:

1. Unplug the USB Dongle: Disconnect the dongle from your PC.
2. Reconnect the Dongle: Plug it back in.
3. Restart the Headset: Turn off the headset and then power it on again.

Step 9: Set as Default Recording Device (for PC Users)

1. Right-Click the Speaker Icon: In the system tray, click on the speaker icon.
2. Access Sound Settings: Go to “Sounds,” then the “Recording” tab.
3. Find Total Beats Stealth 600: Locate the headset, right-click it, and set it as the default device.

By following these steps, you should be able to troubleshoot and fix any issues with your Total Beats Stealth 600 microphone. Thank you for watching this guide!