NEW! How To Connect Orbi Satellite to Another Router (2025) | Easy Setup Guide!

How to Connect Your Orbee Satellite to Another Router: A Step-by-Step Guide

Connecting your Orbee satellite to another router can enhance your network coverage and improve your internet experience. Follow these simple steps to get started.

Step 1: Gather Your Equipment

Before you begin, ensure you have all necessary equipment:

• At least one Orbee router or satellite
• An Ethernet cable

Step 2: Connect the Orbee Router to Your Existing Router

1. Take the Ethernet cable and connect one end to a LAN port on your existing router.
2. Connect the other end to the WAN (Internet) port on your Orbee router.

Step 3: Set Your Orbee Router to Access Point Mode

1. Open a web browser and visit orlogin.com.
2. Log in with your credentials (username and password).
3. Navigate to the Advanced Settings section.
4. Select Advanced Setup, then go to Router AP Mode.
5. Choose Access Point Mode and click on Save Changes.

Your Orbee router will now operate as a Wi-Fi access point, expanding your network.

Step 4: Sync the Orbee Satellite with the Orbee Router

1. Plug in your Orbee satellite near the Orbee router.
2. Wait for the satellite’s LED ring to turn solid white.
3. Press the Sense button on the Orbee router.
4. Within two minutes, press the Sense button on the Orbee satellite.

Once successfully connected, the LED ring on the satellite will turn blue.

Step 5: Position the Satellite for Optimal Coverage

After syncing, place the satellite in a location where it can receive a strong signal from the Orbee router. Use the LED ring as a guide to find the best position.

Conclusion

By following these steps, you can effectively connect your Orbee satellite to another router, enhancing your Wi-Fi coverage. Thank you for reading, and don’t forget to subscribe for more updates and tips!