NEW! How to Configure TP-Link EAP650 Outdoor Omada (2025) | Full Setup & Installation Guide!

Configuring the TP-Link Omada EAP650 Outdoor Access Point

Setting up the TP-Link Omada True Wi-Fi 6 EAP650 outdoor access point can enhance your network’s performance. This guide walks you through the process step-by-step.

Connecting the EAP650 to Power Over Ethernet (PoE)

1. Connect the EAP650 Outdoor: Start by plugging the EAP650 into a PoE switch.
2. Ensure Network Compatibility: Make sure your computer is connected to the same network as the EAP650. This is crucial for proper communication between devices.

Optional: Download the Omada App

You can optionally download the Omada app from Google Play to manage your network settings more conveniently.

Finding the Default IP Address

To configure the EAP650, you need to find its default IP address. This can typically be done by checking your router’s DHCP client list or using tools like Advanced IP Scanner.

Standalone Mode Configuration

1. Connect to the EAP: Open your browser and go to the IP address of the EAP650.
2. Login: Use the default username and password. You will be prompted to create a new password upon your first login.

Basic Setup of the EAP650

1. Navigate to Wireless Settings: Go to the wireless SSID settings to configure your Wi-Fi network.
2. Set Wi-Fi Name and Password: Enter your desired Wi-Fi name (SSID) and password.
3. Assign a Static IP (Optional): If desired, navigate to the network settings to assign a static IP.
4. Save Changes: Click "Save" to apply all your settings.

Omada Controller-Based Setup

If you prefer to manage your network through the Omada controller, follow the steps below.

Option A: Using the Omada Software Controller

1. Download the Controller: Download and install the Omada software controller from the TP-Link website.
2. Launch the Software: Access the same IP address as mentioned before and follow the initial setup wizard to configure your EAP650.

Option B: Using Omada Cloud

1. Access the Cloud: Visit omada.tplinkcloud.com.
2. Login or Create an Account: Either log in with your TP-Link ID or create a new one.
3. Add Your EAP650: Using the device UID located on the EAP650’s label, add it to your account.
4. Connect the Hardware Controller: Connect the hardware controller to your network.
5. Adopt the EAP650: Access the device via its IP address or through the Omada app, and click "Adopt" once it is detected.
6. Network Configuration: After adopting, configure your network settings, including SSID, schedules, guest access, and more.

Conclusion

By following these steps, you can successfully configure your TP-Link Omada EAP650 outdoor access point. Thank you for following this guide, and enjoy your enhanced Wi-Fi experience!